// This config is in the KDL format: https://kdl.dev
// "/-" comments out the following node.
// Check the wiki for a full description of the configuration:
// https://yalter.github.io/niri/Configuration:-Introduction

// Input device configuration.
// Find the full list of options on the wiki:
// https://yalter.github.io/niri/Configuration:-Input
input {
    keyboard {
        xkb {
            layout "us,"
            variant "colemak_dh_iso,"
            options "grp:alt_shift_toggle,compose:ralt"
        }

        // Enable numlock on startup, omitting this setting disables it.
        numlock
    }

    // Next sections include libinput settings.
    // Omitting settings disables them, or leaves them at their default values.
    // All commented-out settings here are examples, not defaults.
    touchpad {
        // off
        tap
        // dwt
        // dwtp
        // drag false
        // drag-lock
        natural-scroll
        // accel-speed 0.2
        // accel-profile "flat"
        // scroll-method "two-finger"
        // disabled-on-external-mouse
    }

    warp-mouse-to-focus
    focus-follows-mouse
}

// You can configure outputs by their name, which you can find
// by running `niri msg outputs` while inside a niri instance.
// The built-in laptop monitor is usually called "eDP-1".
// Find more information on the wiki:
// https://yalter.github.io/niri/Configuration:-Outputs
// Remember to uncomment the node by removing "/-"!
/-output "eDP-1" {
    // Uncomment this line to disable this output.
    // off

    // Resolution and, optionally, refresh rate of the output.
    // The format is "<width>x<height>" or "<width>x<height>@<refresh rate>".
    // If the refresh rate is omitted, niri will pick the highest refresh rate
    // for the resolution.
    // If the mode is omitted altogether or is invalid, niri will pick one automatically.
    // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes.
    mode "1920x1080@120.030"

    // You can use integer or fractional scale, for example use 1.5 for 150% scale.
    scale 2

    // Transform allows to rotate the output counter-clockwise, valid values are:
    // normal, 90, 180, 270, flipped, flipped-90, flipped-180 and flipped-270.
    transform "normal"

    // Position of the output in the global coordinate space.
    // This affects directional monitor actions like "focus-monitor-left", and cursor movement.
    // The cursor can only move between directly adjacent outputs.
    // Output scale and rotation has to be taken into account for positioning:
    // outputs are sized in logical, or scaled, pixels.
    // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080,
    // so to put another output directly adjacent to it on the right, set its x to 1920.
    // If the position is unset or results in an overlap, the output is instead placed
    // automatically.
    position x=1280 y=0
}

// Settings that influence how windows are positioned and sized.
// Find more information on the wiki:
// https://yalter.github.io/niri/Configuration:-Layout
layout {
    // Set gaps around windows in logical pixels.
    gaps 6

    // When to center a column when changing focus, options are:
    // - "never", default behavior, focusing an off-screen column will keep at the left
    //   or right edge of the screen.
    // - "always", the focused column will always be centered.
    // - "on-overflow", focusing a column will center it if it doesn't fit
    //   together with the previously focused column.
    center-focused-column "never"

    // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between.
    preset-column-widths {
        // Proportion sets the width as a fraction of the output width, taking gaps into account.
        // For example, you can perfectly fit four windows sized "proportion 0.25" on an output.
        // The default preset widths are 1/3, 1/2 and 2/3 of the output.
        proportion 0.33333
        proportion 0.5
        proportion 0.66667

        // Fixed sets the width in logical pixels exactly.
        // fixed 1920
    }

    // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between.
    // preset-window-heights { }

    // You can change the default width of the new windows.
    default-column-width { proportion 0.5; }
    // If you leave the brackets empty, the windows themselves will decide their initial width.
    // default-column-width {}

    // By default focus ring and border are rendered as a solid background rectangle
    // behind windows. That is, they will show up through semitransparent windows.
    // This is because windows using client-side decorations can have an arbitrary shape.
    //
    // If you don't like that, you should uncomment `prefer-no-csd` below.
    // Niri will draw focus ring and border *around* windows that agree to omit their
    // client-side decorations.
    //
    // Alternatively, you can override it with a window rule called
    // `draw-border-with-background`.

    focus-ring {
        off
    }

    border {
        width 2
        active-color "#d65d0e"
        inactive-color "#181926"

        // Color of the border around windows that request your attention.
        urgent-color "#9b0000"
    }

    // You can enable drop shadows for windows.
    shadow {
        // Uncomment the next line to enable shadows.
        // on

        // By default, the shadow draws only around its window, and not behind it.
        // Uncomment this setting to make the shadow draw behind its window.
        //
        // Note that niri has no way of knowing about the CSD window corner
        // radius. It has to assume that windows have square corners, leading to
        // shadow artifacts inside the CSD rounded corners. This setting fixes
        // those artifacts.
        //
        // However, instead you may want to set prefer-no-csd and/or
        // geometry-corner-radius. Then, niri will know the corner radius and
        // draw the shadow correctly, without having to draw it behind the
        // window. These will also remove client-side shadows if the window
        // draws any.
        //
        // draw-behind-window true

        // You can change how shadows look. The values below are in logical
        // pixels and match the CSS box-shadow properties.

        // Softness controls the shadow blur radius.
        softness 30

        // Spread expands the shadow.
        spread 5

        // Offset moves the shadow relative to the window.
        offset x=0 y=5

        // You can also change the shadow color and opacity.
        color "#0007"
    }
}

// Add lines like this to spawn processes at startup.
// Note that running niri as a session supports xdg-desktop-autostart,
// which may be more convenient to use.
// See the binds section below for more spawn examples.

// This line starts waybar, a commonly used bar for Wayland compositors.
spawn-at-startup "waybar"
spawn-at-startup "swayosd-server"
spawn-at-startup "hypridle"

// To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup:
// spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell"

hotkey-overlay {
    skip-at-startup
}

prefer-no-csd

// You can change the path where screenshots are saved.
// A ~ at the front will be expanded to the home directory.
// The path is formatted with strftime(3) to give you the screenshot date and time.
screenshot-path "~/Downloads/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png"

// You can also set this to null to disable saving screenshots to disk.
// screenshot-path null

// Window rules let you adjust behavior for individual windows.
// Find more information on the wiki:
// https://yalter.github.io/niri/Configuration:-Window-Rules

// Work around WezTerm's initial configure bug
// by setting an empty default-column-width.
window-rule {
    // This regular expression is intentionally made as specific as possible,
    // since this is the default config, and we want no false positives.
    // You can get away with just app-id="wezterm" if you want.
    match app-id=r#"^org\.wezfurlong\.wezterm$"#
    default-column-width {}
}

// Open the Firefox picture-in-picture player as floating by default.
window-rule {
    // This app-id regular expression will work for both:
    // - host Firefox (app-id is "firefox")
    // - Flatpak Firefox (app-id is "org.mozilla.firefox")
    match app-id=r#"librewolf$"# title="^Picture-in-Picture$"
    open-floating true
}

// Example: block out two password managers from screen capture.
// (This example rule is commented out with a "/-" in front.)
/-window-rule {
    match app-id=r#"^Bitwarden$"#
    match app-id=r#"^org\.gnome\.World\.Secrets$"#

    block-out-from "screen-capture"

    // Use this instead if you want them visible on third-party screenshot tools.
    // block-out-from "screencast"
}

binds {
    Mod+Shift+Slash { show-hotkey-overlay; }

    // Suggested binds for running programs: terminal, app launcher, screen locker.
    Mod+RETURN hotkey-overlay-title="Open a Terminal: foot" { spawn "foot"; }
    Mod+SPACE hotkey-overlay-title="Run an Application: fuzzel" { spawn "fuzzel"; }
    Mod+S hotkey-overlay-title="Open a Browser: librewolf" { spawn "librewolf"; }
    Super+Alt+L hotkey-overlay-title="Lock the Screen: hyprlock" { spawn "hyprlock"; }
    Mod+T hotkey-overlay-title="Open file picker: Thunar" { spawn "thunar"; }

    // Example volume keys mappings for PipeWire & WirePlumber.
    // The allow-when-locked=true property makes them work even when the session is locked.
    // Using spawn-sh allows to pass multiple arguments together with the command.
    // "-l 1.0" limits the volume to 100%.
    XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "swayosd-client --output-volume raise"; }
    XF86AudioLowerVolume allow-when-locked=true { spawn-sh "swayosd-client --output-volume lower"; }
    XF86AudioMute        allow-when-locked=true { spawn-sh "swayosd-client --output-volume mute-toggle"; }
    XF86AudioMicMute     allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"; }

    // Example media keys mapping using playerctl.
    // This will work with any MPRIS-enabled media player.
    XF86AudioPlay        allow-when-locked=true { spawn-sh "playerctl play-pause"; }
    XF86AudioStop        allow-when-locked=true { spawn-sh "playerctl stop"; }
    XF86AudioPrev        allow-when-locked=true { spawn-sh "playerctl previous"; }
    XF86AudioNext        allow-when-locked=true { spawn-sh "playerctl next"; }

    XF86MonBrightnessUp allow-when-locked=true { spawn-sh "swayosd-client --brightness raise"; }
    XF86MonBrightnessDown allow-when-locked=true { spawn-sh "swayosd-client --brightness lower"; }

    // Open/close the Overview: a zoomed-out view of workspaces and windows.
    // You can also move the mouse into the top-left hot corner,
    // or do a four-finger swipe up on a touchpad.
    Mod+Y repeat=false { toggle-overview; }

    Mod+Q repeat=false { close-window; }

    Mod+N  { focus-column-left; }
    Mod+E  { focus-window-down; }
    Mod+I  { focus-window-up; }
    Mod+O  { focus-column-right; }

    Mod+Ctrl+N  { move-column-left; }
    Mod+Ctrl+E  { move-window-down; }
    Mod+Ctrl+I  { move-window-up; }
    Mod+Ctrl+O  { move-column-right; }

    // Alternative commands that move across workspaces when reaching
    // the first or last window in a column.
    // Mod+J     { focus-window-or-workspace-down; }
    // Mod+K     { focus-window-or-workspace-up; }
    // Mod+Ctrl+J     { move-window-down-or-to-workspace-down; }
    // Mod+Ctrl+K     { move-window-up-or-to-workspace-up; }

    Mod+L       { focus-column-first; }
    Mod+U       { focus-column-last; }
    Mod+Ctrl+L  { move-column-to-first; }
    Mod+Ctrl+U  { move-column-to-last; }

    // ---STOPPED EDITING HERE---


    // BROKEN STUFF
    // Mod+Page_Down      { focus-workspace-down; }
    // Mod+Page_Up        { focus-workspace-up; }
    // Mod+U              { focus-workspace-down; }
    // Mod+I              { focus-workspace-up; }
    // Mod+Ctrl+Page_Down { move-column-to-workspace-down; }
    // Mod+Ctrl+Page_Up   { move-column-to-workspace-up; }
    // Mod+Ctrl+U         { move-column-to-workspace-down; }
    // Mod+Ctrl+I         { move-column-to-workspace-up; }

    // Alternatively, there are commands to move just a single window:
    // Mod+Ctrl+Page_Down { move-window-to-workspace-down; }
    // ...

    Mod+Shift+Page_Down { move-workspace-down; }
    Mod+Shift+Page_Up   { move-workspace-up; }
    Mod+Shift+U         { move-workspace-down; }
    Mod+Shift+I         { move-workspace-up; }

    // You can bind mouse wheel scroll ticks using the following syntax.
    // These binds will change direction based on the natural-scroll setting.
    //
    // To avoid scrolling through workspaces really fast, you can use
    // the cooldown-ms property. The bind will be rate-limited to this value.
    // You can set a cooldown on any bind, but it's most useful for the wheel.
    Mod+WheelScrollDown      cooldown-ms=150 { focus-workspace-down; }
    Mod+WheelScrollUp        cooldown-ms=150 { focus-workspace-up; }
    Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; }
    Mod+Ctrl+WheelScrollUp   cooldown-ms=150 { move-column-to-workspace-up; }

    // Usually scrolling up and down with Shift in applications results in
    // horizontal scrolling; these binds replicate that.

    // You can refer to workspaces by index. However, keep in mind that
    // niri is a dynamic workspace system, so these commands are kind of
    // "best effort". Trying to refer to a workspace index bigger than
    // the current workspace count will instead refer to the bottommost
    // (empty) workspace.
    //
    // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on
    // will all refer to the 3rd workspace.
    Mod+1 { focus-workspace 1; }
    Mod+2 { focus-workspace 2; }
    Mod+3 { focus-workspace 3; }
    Mod+4 { focus-workspace 4; }
    Mod+5 { focus-workspace 5; }
    Mod+6 { focus-workspace 6; }
    Mod+7 { focus-workspace 7; }
    Mod+8 { focus-workspace 8; }
    Mod+9 { focus-workspace 9; }
    Mod+Ctrl+1 { move-column-to-workspace 1; }
    Mod+Ctrl+2 { move-column-to-workspace 2; }
    Mod+Ctrl+3 { move-column-to-workspace 3; }
    Mod+Ctrl+4 { move-column-to-workspace 4; }
    Mod+Ctrl+5 { move-column-to-workspace 5; }
    Mod+Ctrl+6 { move-column-to-workspace 6; }
    Mod+Ctrl+7 { move-column-to-workspace 7; }
    Mod+Ctrl+8 { move-column-to-workspace 8; }
    Mod+Ctrl+9 { move-column-to-workspace 9; }

    // Alternatively, there are commands to move just a single window:
    // Mod+Ctrl+1 { move-window-to-workspace 1; }

    // Switches focus between the current and the previous workspace.
    // Mod+Tab { focus-workspace-previous; }

    // The following binds move the focused window in and out of a column.
    // If the window is alone, they will consume it into the nearby column to the side.
    // If the window is already in a column, they will expel it out.
    Mod+BracketLeft  { consume-or-expel-window-left; }
    Mod+BracketRight { consume-or-expel-window-right; }

    // Consume one window from the right to the bottom of the focused column.
    Mod+Comma  { consume-window-into-column; }
    // Expel the bottom window from the focused column to the right.
    Mod+Period { expel-window-from-column; }

    Mod+R { switch-preset-column-width; }
    // Cycling through the presets in reverse order is also possible.
    // Mod+R { switch-preset-column-width-back; }
    Mod+Shift+R { switch-preset-window-height; }
    Mod+Ctrl+R { reset-window-height; }
    Mod+F { maximize-column; }
    Mod+Shift+F { fullscreen-window; }

    // While maximize-column leaves gaps and borders around the window,
    // maximize-window-to-edges doesn't: the window expands to the edges of the screen.
    // This bind corresponds to normal window maximizing,
    // e.g. by double-clicking on the titlebar.
    Mod+M { maximize-window-to-edges; }

    // Expand the focused column to space not taken up by other fully visible columns.
    // Makes the column "fill the rest of the space".
    Mod+Ctrl+F { expand-column-to-available-width; }

    Mod+C { center-column; }

    // Center all fully visible columns on screen.
    Mod+Ctrl+C { center-visible-columns; }

    // Finer width adjustments.
    // This command can also:
    // * set width in pixels: "1000"
    // * adjust width in pixels: "-5" or "+5"
    // * set width as a percentage of screen width: "25%"
    // * adjust width as a percentage of screen width: "-10%" or "+10%"
    // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0,
    // set-column-width "100" will make the column occupy 200 physical screen pixels.
    Mod+Minus { set-column-width "-10%"; }
    Mod+Equal { set-column-width "+10%"; }

    // Finer height adjustments when in column with other windows.
    Mod+Shift+Minus { set-window-height "-10%"; }
    Mod+Shift+Equal { set-window-height "+10%"; }

    // Move the focused window between the floating and the tiling layout.
    Mod+V       { toggle-window-floating; }
    Mod+Shift+V { switch-focus-between-floating-and-tiling; }

    // Toggle tabbed column display mode.
    // Windows in this column will appear as vertical tabs,
    // rather than stacked on top of each other.
    Mod+W { toggle-column-tabbed-display; }

    // Actions to switch layouts.
    // Note: if you uncomment these, make sure you do NOT have
    // a matching layout switch hotkey configured in xkb options above.
    // Having both at once on the same hotkey will break the switching,
    // since it will switch twice upon pressing the hotkey (once by xkb, once by niri).
    // Mod+Space       { switch-layout "next"; }
    // Mod+Shift+Space { switch-layout "prev"; }

    Mod+X { screenshot; }

    // Applications such as remote-desktop clients and software KVM switches may
    // request that niri stops processing the keyboard shortcuts defined here
    // so they may, for example, forward the key presses as-is to a remote machine.
    // It's a good idea to bind an escape hatch to toggle the inhibitor,
    // so a buggy application can't hold your session hostage.
    //
    // The allow-inhibiting=false property can be applied to other binds as well,
    // which ensures niri always processes them, even when an inhibitor is active.
    Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; }

    // The quit action will show a confirmation dialog to avoid accidental exits.
    Mod+Shift+E { quit; }
    Ctrl+Alt+Delete { quit; }

    // Powers off the monitors. To turn them back on, do any input like
    // moving the mouse or pressing any other key.
    Mod+Shift+P { power-off-monitors; }
}

cursor {
    xcursor-theme "Capitaine Cursors (Gruvbox)"
    xcursor-size 24
}